How to make a bow of satin ribbon?

Watch the video

How to make a bow of satin ribbon?

The ability to make bows of satin ribbons can be useful if you want to make a beautiful hairpin, rubber band, bezel or hair bandage. Let's learn how to make a satin bow. Consider two ways.

Satin Ribbon Bow

You will need:

  • preparation from a cardboard of 6,5 * 15 cm;
  • 2.5 cm wide satin ribbon;
  • clip;
  • needle and thread;
  • beautiful bead;
  • glue-gel "Moment".

Making a bow:

  1. In the cardboard it is necessary to make a slot in the middle in length, but not to the end.
  2. Then you need to take the tape and, securing it to one end with a clip, wrapBowcarton blank three times so that the slot was in the middle of the tape.
  3. Next, the tape must be cut and secure the second end.
  4. Now you need to flash the thread just along the slot, grabbing all the tapes.
  5. Then remove the clips and gently remove the cardboard. You will have a ribbon stitched in the middle. It is necessary to tighten the thread and wind in the middle of the resulting bow several times. Then the thread must be firmly tied, unnecessary cut.
  6. The ends of the product should be folded and cut obliquely, slightly scorch the edges with a lighter.

You have a bow. Glue a beautiful bead in the middle of it. If you want, you can attach the same bow on top of the bow, but of a smaller size and another suitable color, and only then glue the bead in the middle. This bow will look bigger.

Lush bow

You will need:

  • white and red ribbons 5 cm wide;
  • white and red ribbons 1.5 cm wide;
  • needle with thread;
  • glue-gel "Moment";
  • beautiful bead.

Making a bow:

  1. Take a red ribbon 5 cm wide and prepare two 12 cm long segments, scorch the edges with a lighter.
  2. Then take one piece and sew its ends so that you get a loop.Bow
  3. Do the same with the second leg.
  4. Now put the loops next to them and sew them in the middle, then tighten the thread tightly and wind it around several times. Tie tightly.
  5. Then do the same with the white ribbon.
  6. Next, take a red ribbon with a width of 1.5 cm and prepare segments of 11 cm in length. Edge singe a cigarette lighter.
  7. Make loops like a pretzel from each piece and fasten the middle with a thread.
  8. Also do with white ribbon.

We fold satin bow

  1. First, we put a red bow, then glue pretzels of white color in the middle of the bow so that their “ears” are directed to the edges of the bow.Bow
  2. On these pretzels in the same way we glue the red pretzels.
  3. From above we glue a bow of white color.
  4. Next, you need to pass the edges of the white bow into the pretzels so that the “ears” of the pretzels of both white and red colors are on top of the white bow.
  5. It remains to glue in the middle of a beautiful bead preferably red, but you can and white, and the satin lush bow is ready.

Related news

How to make a bow of satin ribbon image, picture
How to make a bow of satin ribbon 68


How to make a bow of satin ribbon 33


How to make a bow of satin ribbon 27


How to make a bow of satin ribbon 55


How to make a bow of satin ribbon 77


How to make a bow of satin ribbon 24